Get all your news in one place.

100's of premium titles.
One app.

Start reading

Get all your news in one place.

100's of premium titles. One news app.

Start reading

The Latest Breaking News from Bambu Lab

I tested the beginner-friendly Anycubic Kobra X - a 4-color 3D printer that's surprisingly good

Affordable high-speed multi-color printing on a budget.

TechRadar

Labubu sues 3D printer maker Bambu Lab for items made by its users — MakerWorld design repository in hot water over IP theft by its users

While Bambu Lab builds tools to protect creators, a Chinese court case over 3D-printed Labubu fakes turns the tables on the 3DP giant.

Tom’s Hardware

Tech Brief (March 4): Alibaba Launches Small AI Models Focused on Efficiency

XPeng predicts fully autonomous driving within three years, Huawei says 5G-Advanced now commercialized in over 300 cities

Caixin Global

From analysis to the latest developments in health,
read the most diverse news in one place.

MakerWorld launches Copyright Protection Program to help 3D designers fight stolen files being resold online — stamping out knockoffs is priority number one

The Bambu Lab MakerWorld Copyright Protection Program is a free service for MakerWorld Exclusive Designs and will fight IP infringement on any platform.

Tom’s Hardware

Reports of the previously-recalled Bambu Lab 3D printer being a fire hazard resurface, new power board component issue identified as the cause — Bambu says the A1's issue has been addressed, affected units replaced or repaired

Users insist the A1’s AC board is flawed and should be recalled.

Tom’s Hardware

The 8 high-precision 3D printers that really impressed us in 2025

As hardware editor, I've picked out the most accurate 3D printers that stood out during all our tests

TechRadar

After 4 months of testing the Anycubic Kobra 3 V2, I'm getting fed up

It prints flawlessly in single colour, but the Ace Pro is problematic at best.

Creative Bloq

Read news from The Economist, FT, and more,
with one subscription

Snapmaker Raises Millions as Chinese Big Tech Investors Pile Into 3D Printing

Snapmaker rides its U1 tool changer to the big leagues.

Tom’s Hardware

Bambu Lab and Prusa show off new 3D printers at Formnext — H2C dual-nozzle uses Vortek nozzle to eliminate 3D printer 'poop'

Both Bambu Lab and Prusa Research introduced new printers they had been teasing for months, attracting large crowds eager to see the shiny new tech around their booths.

Tom’s Hardware

Sorry American 3D printing fans - Bambu Lab has a mighty new seven-nozzle printer, but you won't be able to get it anytime soon

Bambu Labs H2C introduces a magnetic seven-nozzle system with improved purge handling, reduced bed size, higher costs -but there's no US release yet.

TechRadar

Say goodbye to printer poo - meet the Bambu Lab H2C

The future of 3D printing is here.

Creative Bloq

Bambu Lab launches beastly seven-nozzle 3D printer at FormNext — H2C model launches everywhere but the US due to tariffs

Bambu Lab announced the long-awaited seven-nozzle H2C this week at FormNext, the world’s largest additive manufacturing expo.

Tom’s Hardware

I've spent the past month testing the Bambu Lab H2C 3D printer and it's not what I was expecting - it's actually much better

The H2C is one of the most anticipated machines for a long time, featuring not only a dual head but the Vortek Hot-end Change System. It features six mechanically mounted hot ends that are inductively heated to enable up to 7 colours/materials straight out of the box, and most importantly,…

TechRadar

Centauri Carbon 2 spotted in the wild ahead of Q1 2026 release - multi-material 3D printer's details listed in first official spec page

Multi-material 3D printing finally comes to the Centauri Carbon, but not the one you were thinking of.

Tom’s Hardware

Get all your
news in one place.

100's of premium titles.
One news app.

Tom’s Hardware

The Bambu Lab P2S is the best 3D Printer you can’t have — 'logistics delays' leave the printers locked out of the US, at least for now

Bambu Lab launches a printer without the US Market

Creative Bloq

Bambu Lab unveils new P2S 3D printer

It redefines the P1-series legacy with H-series upgrades.

TechRadar

I used the Bambu Lab P2S for over 300 hours, and here's why it's almost perfect

The Bambu Lab P2S essentially takes all the latest technology and experience from the Bambu Lab series of 3D printers and puts it into this compact, premium entry to mid-level 3D printer. It's just about as refined as they come.

Tom’s Hardware

Prusa’s mobile slicer now works with competitors' 3D printers — new EasyPrint tool works with Bambu, Creality, and more

A new Pursa mobile slicer update brings support for competitor 3D printers, including Bambu.

Get all your
news in one place.

100's of premium titles.
One news app.

Tom’s Hardware

3D printing's tool changer wars heat up as Prusa re-enters the ring

Hot on the heels of Snapmaker’s U1 launch, Bambu and Prusa chime in with new machine teasers.

Tom’s Hardware

Hot on the heels of the H2S, Bambu Lab announces the seven-color, wireless nozzle-swapping Vortek H2C

To avoid buyer’s remorse, Bambu Lab announced its new tool changer-like system, dropping in Q4.

Creative Bloq

My first impressions of Bambu Lab's latest H2S 3D printer

The cutting features aren't quite Cricut level but the laser is mighty impressive.

TechRadar

I tested Bambu Lab's latest 3D printer - and the H2S single nozzle design comes hot on the heels of the H2D to offer ultimate speed and accuracy

The H2S is something of a surprise, a single-nozzle 3D printer from Bambu Lab in the same form factor as the highly respected H2D dual-nozzle 3D printer. The H2S is finely tuned to enable faster print speeds for single and multi with a build volume that far exceeds what has…

TechRadar

Prusa CEO declares "open hardware desktop 3D printing is dead" - China blamed for causing the beginning of the end

Prusa declares open hardware 3D printing dead, blaming China’s subsidies, patent imbalance, and disputes transformed collaborative innovation into a competitive and increasingly restrictive global industry.

Tom’s Hardware

3D printer maker SnapMaker raised a staggering $7.8 million on the first day of Kickstarter for its Affordable Tool Changer, breaking Bambu's record

The Snapmaker U1 raised $7.4 million, surpassing the Bambu Lab X1C record.

TechRadar

I tested Snapmaker's long-awaited new 3D printer - and it's a seriously fast, affordable, multi-color, multi-material machine

Snapmaker is known for its multi-tool machines, but with the U1 four 3D print tool head design, it focuses on refining 3D printing with a machine that can handle four materials out of the box, fast print speeds and, most notably, far less waste.

1 2 3

People

From analysis to the latest developments in health,
read the most diverse news in one place.

Organisations

Read news from The Economist, FT, and more,
with one subscription

Places

Fourteen days free

Download the app

One app. One membership.
100+ trusted global sources.