Get all your news in one place.
100’s of premium titles.
One app.
Start reading
Destructoid
Destructoid
Pedro Peres

How to complete the Containment Measures mission in Killing Floor 3

Killing Floor 3 sends you back to the Army Depot in the Containment Measures mission, just after you obtained a few samples from this area. Completing this mission can be a bit trickier than others, since you must interact with certain elements in two objectives.

Your last visit to the R&D Lab yielded some slightly creepy results after scanning the samples. While you can't undo the outbreak, you can do some damage control. Here's what you need to do for this mission in Killing Floor 3.

Containment Measures mission guide in Killing Floor 3

The Army Depot map in Killing Floor, as seen from one of its spawn zones.
If you spawn here, look right. Screenshot by Destructoid

Containment Measures has two main objectives: burn tainted corpses and scan shipping containers. They're spread out over different areas in the close-quarters Army Depot, so knowing how to move through this zone is key.

Where to find tainted corpses in Containment Measures in Killing Floor 3

Here are the corpses we found during our run of Containment Measures. We located four tainted corpses taking the path in Absolute Massacre, which leads you through the train wreckage and deeper into the main building. Locations may vary depending on runs and spawn points, but you can get more than five of them in a run.

  • To the right of the wreckage spawn point.
  • To the left of the train wreck, near a small set of stairs.
  • Near the train wreck, by an armored lockbox.
  • Inside the train wreck, near a shipping container.
  • To the right of the garage spawn point, near a gate with a burned tank.
  • Past the gate to the Warehouse from the garage.

If the helicopter drops you off in the garage, you can find a tainted corpse just to your right and another one past the broken blast door that connects to the warehouse up ahead. Light up at least one of them, then take the ramp or the stairs into the train pit. Cross over and you have four tainted corpses in a somewhat straight line.

One is by the tunnel, near a blast door marked with a D, to the right of the regular spawn. Another is on your left, near a broken wall with an explosive barrel on it. Find one more in the train's wreckage and look for the last one by an armor box nearby.

Burning five corpses and surviving the way points you to the next main objective, which is further inside the warehouse and requires you to scan three different containers.

Where to scan shipping containers in the Main Building Interior

The next step requires you to scan three shipping containers, which are easier to find when you're not being chased by hordes of the clinically undead. The first two are close to each other, but the third takes a bit of backtracking.

  • On a container to your right as you head up a ramp, across the large fan.
  • On an elevated platform in the shipping bay.
  • On the ground floor of the inspection room, by the stairs.

Grab the first two as you're heading into the main building interior, then hunt the last one when you're free to go to the inspection room. You can climb the second-floor platform with a red light, emerge on top, and work your way down.

After finding all containers, clear the run and you'll advance to the next mission in Killing Floor 3, Shipment Tracking.

The post How to complete the Containment Measures mission in Killing Floor 3 appeared first on Destructoid.

Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.