Routine maintenance is supposed to keep your car running smoothly. But sometimes, the very act of maintaining your vehicle can lead to unexpected problems. You might go in for a simple oil change and leave with a broken sensor. Or maybe a tire rotation ends with a warning light on your dashboard. These issues are more common than you might think. Knowing which vehicle features are most likely to break during routine maintenance can save you time, money, and frustration. Here’s what you need to watch out for.
1. Tire Pressure Monitoring Sensors
Tire pressure monitoring sensors (TPMS) are fragile. They sit inside your wheels and keep track of air pressure. When you get your tires rotated or replaced, these sensors can get damaged. Sometimes, a tech might accidentally break one while removing a tire. Other times, the sensor’s battery dies after being handled. If your TPMS light comes on after a tire service, this could be why. Always ask the shop to check the sensors before and after any tire work.
2. Oil Pan Drain Plug Threads
Changing your oil is basic maintenance. But the oil pan drain plug threads can strip easily if over-tightened. Once stripped, the plug won’t seal right, and oil can leak. This is a common problem, especially at quick-lube shops where speed is a priority. If you notice oil spots under your car after an oil change, check the drain plug. Using a torque wrench and replacing the washer can help prevent this issue.
3. Plastic Engine Covers and Clips
Many modern cars have plastic engine covers held in place by small clips. These covers need to come off for most engine work, like changing spark plugs or air filters. The clips are easy to break, especially if they’re old or brittle. Once broken, the cover may rattle or not fit right. If you hear new noises after a service, check these covers and clips. Replacing them is cheap, but it’s annoying when they break.
4. Cabin Air Filter Housing
Cabin air filters are often hidden behind glove boxes or under dashboards. The housings are usually made of thin plastic. When a mechanic changes the filter, the housing can crack or the latch can snap. If you notice rattling or a loose glove box after a filter change, this could be the cause. Ask your mechanic to be gentle and double-check the housing before finishing the job.
5. Oil Filter Housing Cap
Some cars use a plastic cap to hold the oil filter in place. These caps can crack if over-tightened or if the wrong tool is used. Once cracked, oil can leak, and the cap will need to be replaced. This is a common issue on European cars. If you see oil leaking after a filter change, inspect the cap. Using the right tool and not over-tightening can help avoid this problem.
6. Windshield Wiper Arms
Windshield wipers need to be replaced regularly. But the arms that hold the blades can bend or break if too much force is used. Sometimes, the wiper motor linkage can also get damaged. If your wipers don’t move right after a service, the arms might be bent. Always lift wiper arms gently and avoid forcing them. If you’re not sure how to replace wipers, ask for help.
7. Battery Terminals and Cables
Battery maintenance is simple, but the terminals and cables are easy to damage. Over-tightening the clamps can crack the battery post. Pulling on the cables can break the connection. If your car won’t start after a battery service, check the terminals. Clean, tight connections are key. Use a battery terminal puller instead of yanking on the cables.
8. Mass Air Flow Sensor
The mass air flow (MAF) sensor measures air entering the engine. It’s sensitive and can get damaged during air filter changes. If the sensor is bumped or handled roughly, it may fail. This can cause poor engine performance and a check engine light. If your car runs rough after a filter change, the MAF sensor could be the problem. Handle it carefully and avoid touching the sensor element.
9. Underbody Splash Shields
Many cars have plastic splash shields under the engine. These shields protect against dirt and water. During oil changes or inspections, these shields are often removed. The fasteners can break or get lost, and the shield may not be reinstalled correctly. If you hear scraping noises after a service, check the splash shield. Replacing missing fasteners is cheap and easy.
Why Paying Attention During Maintenance Matters
Routine maintenance is important, but it’s not always risk-free. Many vehicle features are fragile and can break during even simple services. Knowing what to watch for helps you catch problems early. If you notice new noises, warning lights, or leaks after maintenance, don’t ignore them. Speak up and ask your mechanic to double-check their work. Staying alert can save you from bigger headaches down the road.
Have you ever had something break on your car during routine maintenance? Share your story in the comments.
Read More
7 Cars Most Men Won’t Buy Because They Don’t Look Manly Enough
9 Car Brands That Quietly Lost Consumer Trust in the Last 5 Years
The post 9 Vehicle Features That Break During Routine Maintenance appeared first on Clever Dude Personal Finance & Money.
