Getting a flat tire can turn a good day into a bad one fast, especially if you don’t know how to change a tire on your own. You’re probably already running late, and this has just thrown another wrench into your day. Before you find yourself in this predicament, it’s important to learn how to do it. Here are five simple steps that anyone can follow to change a tire fast and get back on the road.
Everyone Should Know How to Change a Tire
1. Get to Safety and Gather Your Tools
Before anything else, pull your car over to a safe, flat location away from traffic. Turn on your hazard lights and apply the parking brake. Make sure you have the essentials: a spare tire (ideally inflated), a jack, a lug wrench, and your car’s manual. If you have a tire wedge or brick, place it behind the opposite tire to prevent rolling. Knowing how to change a tire starts with preparation, and your safety comes first.
2. Loosen the Lug Nuts Before Lifting the Car
Take your lug wrench and turn the lug nuts counterclockwise to loosen them, but don’t remove them yet. Doing this before lifting the car ensures you have leverage while the tire is still stabilized. You may need to use your body weight or foot to get stubborn lug nuts to budge. If your car has a hubcap, remove it first to access the lug nuts. Learning how to change a tire means knowing that timing matters, even with the smallest steps.
3. Lift the Vehicle with the Jack
Locate your vehicle’s jacking point—usually just behind the front or rear tires—and position the jack underneath. Crank the jack until the flat tire is about six inches off the ground. Make sure the jack is stable and standing on solid, level ground (never soft dirt or gravel). If you’re unsure where the jack goes, your owner’s manual will have an illustration. This part of how to change a tire might seem intimidating, but once the car is secure, you’re halfway done.
4. Remove the Flat Tire and Replace It with the Spare
Now unscrew the loosened lug nuts all the way and pull the flat tire straight off. Set it aside safely—never upright where it can roll. Lift the spare tire and line it up with the lug bolts, then slide it into place. Hand-tighten the lug nuts as much as possible in a star pattern (alternating across bolts rather than going in a circle). This keeps the tire aligned and secure—a critical part of how to change a tire correctly.
5. Lower the Car and Tighten Everything Securely
Use the jack to slowly lower the car back to the ground. Once the full weight of the vehicle is back on the tire, use your lug wrench to fully tighten the lug nuts in a crisscross pattern. Don’t rush this step—proper tightening ensures the tire won’t wobble or come loose. Give each nut a solid pull to make sure it’s locked in. The last rule of how to change a tire: double-check everything before driving away.
Confidence on the Road Starts With Knowing What to Do
Knowing how to change a tire can be incredibly empowering. Getting a flat is frustrating, but knowing what to do will help you prevent it from ruining your entire day. It’s a basic skill that, once you learn, will pay off when you need it most. Practice a couple of times at home and hit the road with the peace of mind that you’re prepared for whatever might happen.
Have you ever had to change a tire on your own? Share your experience in the comments—and tell us your best roadside tip!
Read More
5 Lies Auto Repair Shops Tell You to Get You To Buy New Tires
Here’s Why New Cars No Longer Come With Spare Tires
The post Simple Instructions: 5 Simple Steps to Changing A Tire Quickly appeared first on Clever Dude Personal Finance & Money.
