Although there are many higher-end motherboards that feature 2.5GbE or even 5GbE network ports, only some of them feature a 10GbE network adapter due to cost concerns. However, this may change later this year as Realtek is prepping an inexpensive 10GbE controller that is aimed at motherboards. The controller is being showcased at Computex 2025.
The Realtek RTL8127 is a tiny — measuring 9mm x 9mm — network controller with a PCIe 4.0 x2 interface that supports a wide range of Ethernet speeds, including 2.5 Gbps, 5 Gbps, and 10 Gbps. The RTL8127 controller consumes about 1.95W and supports modern standby modes, which is critical for laptops. The controller integrates hardware-level error correction (ECC) and cyclic redundancy check (CRC) features to ensure reliable connections and data integrity during transmission. Also, the unit features built-in self-loopback diagnostic functions for easier maintenance.
The 10GBase-T technology has been used primarily in servers and high-end workstations, but its adoption for more mainstream PCs has been slow, to put it mildly. Aquantia tried to popularize it for enthusiasts in the late 2010s, then it got acquired by Marvell in 2019, and while the company still sells the AQC107 silicon, it is quite expensive for motherboard integration, and add-on cards are, by definitio,n more expensive than integrated solutions.
Features of the RTL8127 make it ideal for a range of applications, including integration into motherboards, laptops, add-on Ethernet cards, and various customer premises equipment (CPE). Perhaps more importantly, Realtek plans to sell these chips for about $10 starting later this year, which will make its integration a much more appealing endeavor for motherboard makers.
Of course, producers of mainboards will sell the 10GbE as a premium feature starting from late 2025 – early 2026, so expect 10GbE connectivity to be a part of higher-end offerings and to that end we can only wonder how much will desktop motherboards with a 10GbE cost.
Of course, just like earlier, the big concern is how much the infrastructure (switches, access points, etc.) supporting 10GbE costs. At present, the cheapest 10GBase-T switch from TP-Link costs $299 at Newegg, and, of course, this switch requires CAT6 or CAT6A cables, which are also not cheap, making a 10GbE network a pretty expensive endeavor. Then again, if there are a lot of motherboards with a cheap 10GbE NIC, demand for switches goes up, and they will get cheaper. However, we can only wonder when this time comes.
Follow Tom's Hardware on Google News to get our up-to-date news, analysis, and reviews in your feeds. Make sure to click the Follow button.
