Get all your news in one place.
100’s of premium titles.
One app.
Start reading
Real Homes
Real Homes
Beth Mahoney

How to clean your cleaning supplies — because, yes, they need it

A pink bubbly background with white borders and cut outs of a dust pan and brush, vacuum cleaner and broom.

Even after spending a ton of $$$ on a new vacuum, the trending TikTok mop, or that must-have dustpan and brush everyone’s raving about, you'll notice that dust and dirt don't discriminate. No matter how bougie your cleaning items are, they get gross, too! But you can probably relate: cleaning your best cleaning supplies and tools probably isn't something you think about 24/7.

The concept of cleaning your cleaning items might seem a li’l pointless but it’s actually super important to keep them fresh and properly maintained. If you don't you’re risking how efficiently they will work and putting your own health at risk from. Yep, really! 

With that in mind, you’re probably wondering what the best methods are to give your cleaning supplies a much-needed deep clean. Don’t panic, because we’ve got you covered with our mini step-by-step guides.

How to clean a vacuum head and brush roll 

(Image credit: Amazon / Miele)

To ensure that your vacuum continues to perform at its highest level, vacuum heads should be cleaned regularly. 

Good to know

Time: 15 minutes

Difficulty: Easy 

Here’s what you’ll need

How to clean a vacuum head and brush roll

Step 1: Unclog the brush roll

The first step to cleaning a vacuum head is to unclog the brush roll inside the head if it’s wrapped in hair or other debris. An easy way to do this is to use a pair of scissors to cut away anything that’s wrapped around the roll, restricting it. 

Step 2: Remove and wipe the beater bar 

If your vacuum has a removable brush roll, remove it and carefully wipe it over with a damp cloth (making sure to remove any excess water beforehand) to get rid of any built-up dirt or debris. Then, allow it to air dry before replacing the roll. 

Step 3: Wipe the exterior of the vacuum head 

Using a damp microfiber cloth, carefully wipe over the exterior of the vacuum head, removing any dust, dirt, or other debris. 

FAQs

Can you clean a vacuum head?

Yes, it is possible to clean a vacuum head using a few simple tools like a microfiber cloth and a pair of scisssors. Just make sure to follow the manufacturer's care instructions to avoid damaging your vacuum cleaner.

Is it safe to clean a vacuum brush roll?

Yes, you can safely clean a vacuum brush roll. Just make sure to check how the manufacturer recommends you clean the roll, to help prevent any accidental damage from occurring. 


How to clean a broom 

(Image credit: Canva)

To ensure that your broom doesn't spread more dust and dirt than it collects, cleaning it regularly is vital. 

Good to know

Time: 15 minutes

Difficulty: Easy

Helpful hints: Remember, each broom type (bristle, nylon and silicone) may require different care, so always do your research before cleaning. 

Here’s what you’ll need

How to clean a broom

Step 1: Remove dust and debris 

Take the broom outside and run the bristles along the edge of a step to help to remove any lodged dirt, dust, or debris. 

Step 2: Wash the broom 

Fill a bucket with warm water and two teaspoons of dish soap, then swish the broom through the water to release any trapped dirt and debris from the bristles. For bristle or nylon brooms, only leave the brush in the water for a few minutes before removing it. For silicone brooms, it’s safe to leave the broom head in the water to soak for 10 minutes — this will help it get a deeper clean. 

Step 3: Air dry the broom  

Once you’ve given the brush a deep clean, take it outside and shake any excess water off of the brush, before leaving it to air dry. For best results, stand the broom with the bristles pointing down, allowing any leftover water to easily drain off. 

FAQs

Can I wash a bristle broom?

It's fine to wash a bristle broom, just make sure not to submerge the bristles for too long. Also make sure your broom has plenty of time to dry. 

Are silicone brooms easier to clean?

Because silicone is more hard-wearing than natural bristles and nylon bristles and has non-stick properties, silicone brooms can be easier to clean. 


How to clean a dust pan and brush 

(Image credit: Canva)

Your dust pan and the mini broom that comes with it have seen a lot. Make sure they get cleaned, too, with this helpful (and easy!) step-by-step guide.

Good to know

Time: 15 minutes

Difficulty: Easy

Helpful hints: Remember, each broom type (bristle, nylon and silicone) may require different care, so always do your research before cleaning. 

Here's what you'll need

How to clean a dust pan and brush

Step 1: Remove dust and debris 

Use the brush to remove any grime from the pan. Then, take the brush outside and run the bristles along the edge of a step to help to remove any lodged dirt, dust, or debris. 

Step 2: Wash the brush

Fill a bucket with warm water and two teaspoons of dish soap. You'll then submerge the small broom in the water and swish it around. This will help remove any grime or trapped dirt that's been stuck within the bristles. If it has nylon bristles, you'll only need to do this for a couple of minutes max. Silicone brushes can handle the soapy solution for longer (up to 10 minutes). 

Step 3: Wash the pan 

Fill the bucket with fresh soapy water and then submerge the pan into the water, allowing it to soak for five minutes. Then, using a microfiber cloth, carefully wipe away any remaining dirt or debris from the pan, before removing it from the water. 

Step 4: Air dry the dustpan and brush 

Put the dustpan and brush outside to air dry, making sure that both are positioned upside down so that water can drip off and won't collect on either.


How to clean a mop head 

(Image credit: Canva)

It might not seem like your mop head needs cleaning but if it's not regularly cleaned dirt, bacteria, and grime may start to build up, impacting how efficiently it works. No one wants a dirtier floor after mopping!

Good to know

Time: 15 minutes (excluding washing and drying time)

Difficulty: Easy

Helpful hints:  Make sure to check the manufacturer's care instructions before machine washing. 

Here’s what you’ll need

How to clean a removable mop head

Step 1: Remove the mop head 

The first step is simply to remove the mop head from the frame. If you're not sure how to do this, make sure to refer to the manufacturer's instructions or check online!  

Step 2: Rinse the mop head

Rinse the mop head under your shower at a cooler temperature until the water runs clean and there's no visible dirt or debris. 

Step 3: Wash the mop head in the washing machine

Put the mop head in the washing machine and add a capful of laundry detergent and a cap of white vinegar. Turn the washing machine onto a gentle cycle at a low temperature. 

Step 4: Air dry the mop head

Remove the mop head from the washing machine and place it outside to air dry. Once it's dry you can then reattach it to the mop arm. 

FAQs

Can you machine wash a mop head?

As long as you follow the manufacturer's care instructions, it's safe to machine wash most mop heads. Double-check the guide and be sure to air dry, most can't be thrown in the dryer! 


How to clean a non-removable mop head

(Image credit: Canva)

If your mop has a mop head that isn't removable, cleaning it regularly is still important. Here's how to do it.

Good to know

Time: 15 minutes (plus drying time)

Difficulty: Easy

Helpful hints:  Make sure to read the manufacturer's care instructions before starting the cleaning process. 

Here's what you'll need

How to clean a non-removable mop head

Step 1: Fill a bucket with soapy water

Fill a bucket with hot water and two teaspoons of laundry detergent and a cap full of white vinegar. 

Step 2: Soak the mop head

Place the mop (with the mop head submerged in the water) into the bucket and leave to soak for 10 minutes. Lean the pole against a wall or ledge so it doesn't knock the bucket over.

Step 3: Wring out the mop 

Remove the mop from the water and wring out the head, removing as much excess water as possible. 

Step 4: Wash the mop head 

Next, to ensure that all leftover soap has been removed, wash the mop head by soaking it in a bucket of clean water. 

Step 5: Air dry the mop 

Remove the mop from the water, wring out the mop head (removing as much water as possible) and then place the mop outside to air dry. 

Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.