Get all your news in one place.

100's of premium titles.
One app.

Start reading

Get all your news in one place.

100's of premium titles. One news app.

Start reading

Bored Panda

Mantas Kačerauskas

91 Genius Things People Only Realized They Needed After Seeing These 3D Prints

Dieter Rams Albert Einstein

The world is full of bold, creative, and imaginative people whose out-of-the-box ideas push the limits of what we think is possible. Some creatives have embraced 3D printing, a technology that almost feels like magic, to forge truly impressive and wild designs that range from the super functional to the incredibly artistic. Usually—a bit of both!

Our team has curated this list of the coolest and most stunning 3D printed projects, as shared by the inventive members of the ‘3D Printer’ online community. Keep scrolling to check out their best works, and you never know, you might just feel inspired to pick up a new hobby.

#1 I Designed This Cool Soap Holder That Looks Like A Water Splash!

Good design doesn’t often happen by accident. It requires a lot of careful planning, testing, and editing. No matter the medium, industry, or era, there are some aspects of design that don’t change. They are fundamental.

At their core, they are deeply empathetic because they put the needs and wants of the consumer first. And they strike a delicate balance between function and form.

Legendary industrial designer Dieter Rams encapsulated his ideas into ten principles of design that continue to guide creatives to this day.

#2 I'm Sorry But I Had To Print This. Just In Case

#3 Just Deadpool Toasting Marshmallows On Ghost Rider 🙂

According to Rams, good design is:

Innovative
Makes a product useful
Aesthetic
Makes a product understandable
Unobtrusive
Honest
Long-lasting
Thorough down to the last detail
Environmentally-friendly
As little design as possible

#4 Made A Scuba Diver Kid's Halloween Costume That Blows Bubbles!

#5 I Designed This Cute Little Elephant Design That Looks Like It's Just Been Knitted/Crocheted!

#6 Project Ooglees | Optical Illusion That Follows You With Its Gaze

Half a century ago, in the late 1970s, Rams was becoming more and more concerned about the state of the world around him, which he describes as “an impenetrable confusion of forms, colors, and noises.”

So, he started asking himself whether his designs were good, seeing as he was an iconic figure in the industry.

#7 For Your Toolbox

#8 Check Out My Printing Mushroom😜

#9 Modern Self-Watering Planter Collection

Vitsœ, which has “continuously worked” with designer Rams for 65 years, points out that the possibilities for innovation are not exhausted. There’s always room for novel approaches.

“Technological development is always offering new opportunities for innovative design. But innovative design always develops in tandem with innovative technology, and can never be an end in itself.”

#10 Gothic Style Horse Box

#11 Made Some Vases That Catch The Light In A Cool Way

#12 My First Lithophane Cube

Lit From A Single LED With A Printed Diffuser In A Printed Battery Box. 80mm Pic Size, So About 2.5 Hours Per Side At 0.1 Layer Height. All From Blender Tutorials On Youtube, And Free Advice Here And On Facebook. My Thanks To All Those Who Freely Share Knowledge

Meanwhile, when designing anything, you have to remember that products have to be, well, useful.

“It has to satisfy certain criteria, not only functional, but also psychological and aesthetic. Good design emphasises the usefulness of a product whilst disregarding anything that could possibly detract from it.”

#13 Tick Remover – Little Act Of Kindness Suggestion

#14 Tentacle Stand For Your Xbox Controller

#15 New 3D Printed Soap Dish / Sponge Holder Collection – Now With More Models

On the opposite end of functionality, you have aesthetics, which is an important factor because it affects your well-being as a consumer. Or, to put it simply, people like looking at beautiful things. So, naturally, we want the things that we use daily to look nice.

And yet, you can’t go too far in the artistic direction or you might undermine the functional qualities of the item.

#16 I Haven’t Printed In Forever So I Was Excited To Make A Yarn Bowl For My Wife Who Just Took Up Knitting

#17 Tool Box Labels

#18 I Made This Cute Albert Einstein Model For The Physics Contest!

“Products fulfilling a purpose are like tools. They are neither decorative objects nor works of art. Their design should therefore be both neutral and restrained, to leave room for the user’s self-expression,” Vitsœ explains.

Well-designed products are pretty much self-explanatory and intuitive to use, and they do not try to manipulate consumers’ expectations “with promises that cannot be kept.”

#19 I Designed And Printed A New Cat Skull Mask

#20 I Made A 3D Map Of Ghent, Which City Should I Do Next?

#21 Today’s Finished Product

Furthermore, genuinely good design embraces a long timeframe and timelessness and goes against throwaway culture. It avoids becoming antiquated by rejecting fashionable designs in the first place.

Meanwhile, good designers don’t leave anything to chance and are careful and accurate in their work. They also conserve resources, reduce physical and visual pollution, and aim to protect the environment.

Lastly—and somewhat counterintuitively—good design avoids over-the-top design work. Instead, you embrace the most essential aspects, avoid non-essentials, and focus on the “less is more” mantra.

“Back to purity, back to simplicity,” as Vitsœ puts it.

#22 Mount Fuji As A 91 Piece Krypt Style Jigsaw Puzzle

#23 I Designed This Low Poly Deer For Our Winter Wonderland!

#24 Just Surprised My Colleagues

The ‘3D Printer’ community is one of the many awesome niches on the internet that unites hobbyists and fans who love the flexibility of 3D printing technology.

The group has been inspiring creatives to share their best designs since 2012, and it doesn’t look like it’ll be stopping any time soon. At the time of writing, the community boasts a solid 49k weekly visitors.

#25 I Designed This Cute Little Triceratops Design That Looks Like It's Just Been Knitted/Crocheted!

#26 First Terrain Piece Off The Ender 3 With Default Settings

#27 Doggo

Which of these projects and designs impressed you the most? Which ideas are you itching to put to the test, whether using a 3D printer or another creative medium?

What things would you love to create if you had a 3D printer at home right now? Meanwhile, if you already own a 3D printer, what are the most interesting, functional, or niche projects or parts you’ve ever forged?

Once you’ve upvoted your favorite pics, feel free to join the conversation in the comments!