Get all your news in one place.
100’s of premium titles.
One app.
Start reading
Bike Perfect
Bike Perfect
Lifestyle
Neal Hunt

Reynolds ATRx wheels review – a fast and light option for the smoother end of the gravel spectrum

Reynolds ATRx wheels on a gravel bike.

Reynolds has been making high-end carbon wheels for years now, and the latest ATR wheels are part of their competition range which offers narrower, lighter options compared to their adventure range, which offers more robust gravel options. The ATRx I have had on test has been used on both gravel and all-road bikes through a pretty wet and wild winter, so how did they compare to the best gravel wheels out there?

The 40mm deep rim with its blunt rounded profile offers aero benefits without crosswind drawbacks (Image credit: Neal Hunt)

Design and specifications

The ATRx is the mid-tier model of three in the Reynolds competition wheel range. I Had the 700C version on test, but it is also available in a 650B version, though I'm not sure who the relatively narrow-rimmed smaller version would appeal to. All models use the same rim shape, though the base version is heavier with a more budget-friendly finish.

The carbon rim is on the deep side for a true gravel wheel at 40mm deep with a 30mm external width and 23mm internal. Its blunt profile bulges out to 32mm wide at its widest, giving it a good mix of aerodynamic performance without being adversely affected by crosswinds. Reynolds says the hooked rim design is good for 28mm to 45mm wide tires, though 45mm is pushing it. I tested with a 40mm Zipp tire for the majority of testing, which I think is as wide as I would want to go on these.

The big differences come in the hubs, and the top-spec option uses an Industry Nine I9 setup. The ATRx model I had on test uses Reynolds' hubs, which feature a four-pawl freehub with ten degrees of engagement. These are connected to the rim using Sapim's CX Delta aero profile race spokes with external alloy nipples, which are lighter but less robust than the brass versions used on the base model. Nothing exceptional here spec-wise, but in keeping with Reynolds' claims on longevity and user-friendliness. 

The ATRx features a higher-quality painted finish over the cheaper standard ATX and uses a water transfer graphic that gives the rim a really clean, classic subtle look. I liked the black-on-black aesthetic and think they would look great on any bike, though those who like a flashier setup might not be so keen. 

My pair came in at 1,541g with tubeless valves that are included, which is less than the 1,620g Reynolds quote. The valves have a brass finish and, although trouble-free during testing, look a little cheap compared to anodized valve offerings from brands such as DT Swiss or Hunt and are missing a valve core remover tool. I had the SRAM XDr freehub version, a Shimano version is available, too, but this needs to be ordered separately.

Reynolds offers a lifetime guarantee against manufacturing defects as well as a crash replacement policy that gives 40 percent off a replacement wheelset if you have the misfortune of crashing, which is reassuring, though not as comprehensive as offerings from brands such as Reserve. They sit at the higher end price-wise, as you would expect for a fancy carbon wheel at  $1,699 / £1,500 / €1,710, but deals online make them much more competitive.

The cheaper finish on the valves doesn't effect performance, but does look out of place on such a high end wheel (Image credit: Neal Hunt)

Performance

The setup was straightforward, and the hooked rims come already taped for tubeless. I used Zipp Tangente G40 tires for off-road and Schwalbe G-One Speeds for road miles during testing on my recent Rapha Festive 500. Both tires went up the first time when setting up as tubeless, and neither lost any air from low-pressure burping or sealing issues. 

The ATRx is a stiff wheel compared to a more comfortable pure gravel option like the  ERE Research Tenaci GA40, but not so stiff that they were uncomfortable. It was more a feeling of efficiency than harshness I got from the wheels. They lacked the damped feel of others on chunkier rocky or rooty sections, but performed well on smoother terrain and asphalt. On prolonged rough sections, the stiffness has a negative impact on comfort, but whether the balance between the two is correct depends on your definition of gravel and the trails you ride.

This combination of low weight and stiffness translates into quick accelerations and a nimble feeling when paired with decent fast rubber. The ATRx replaced a relatively heavy set of DT Swiss G1800, and the drop in mass was instantly noticeable on climbs, particularly short steep affairs when out of the saddle. The majority of my testing was on the Argon 18 Dark Matter, a light gravel bike that veers toward the adventure end of the spectrum. Fitting these gave the bike a more poised race-like feel, with snappier acceleration and lighter changes of direction.

They start to feel a little out of their depth on rockier and technical trails, which is no great surprise. The combination of stiffness paired with a relatively narrow inner rim width means there is not as much support or comfort available, but to be fair to Reynolds, they do the G-series of wheels to cover the rowdier end of the spectrum. Although not described as a full-on gravel wheel, I had zero issues through testing, with the rims showing no damage and spoke tension remaining taut and tight.

The ATRx works well as an all-road wheel too. These are a great option for those who mix road and tamer gravel sections. They are close to the best high-end aero road wheels at holding speed and are responsive to hard efforts and out-of-the-saddle climbing. They felt very fast when fitted with wide (for road) rubber but still had enough grip and compliance for gentle trails. They would also be great for the occasional mountain sportive, so if you mainly ride gravel but have an eye on events like the Etape or Maratona, then these should be on your radar.

Reynolds use their own hubs in the ATRx wheels with high quality Sapim CX-Delta aero spokes (Image credit: Neal Hunt)

Verdict

The Reynolds ATRx is a great all-around high-performance wheelset that works best on smoother terrain and occasional asphalt rides, though there are better options out there if your gravel riding is on the rowdier end of the spectrum.

They are light, smooth, and responsive, making a noticeable difference to the feel of the bikes I tested them on. Reynolds' claims of longevity hold true, too, with zero issues during many gravel and road miles this winter. 

Tech specs: Reynolds ATRx wheels

  • Price: From $1,699 / £1,500 / €1,710
  • Inner Rim Width: 23mm
  • Outer Rim Width: 32mm
  • Rim Depth: 40mm
  • Diameter: 700C
  • Spokes: Front 24, rear 24
  • Weight: 1541g (including tape and valves)
  • Hub: Front Reynolds Hub | Rear Reynolds Hub
  • Engagement: 10 degrees
  • Pawls: Four
Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.